Mochini oa Welding Spot Spot Welding
Mochini oa tjheseletsa oa sebaka sa polokelo ea matla ke sesebelisoa se sebelisang li-capacitor tsa polokelo ea matla ho theola mocheso le ho fihlella khokahano ea welding ea likarolo tsa tšepe. E sebelisoa haholo libakeng tse kang tlhahiso ea betri, likarolo tsa elektroniki le likarolo tsa likoloi.
Papiso Dimension | Eneji Storage Spot Welder | Traditional AC / DC Spot Welder |
Mohloli oa Matla | E boloka matla a capacitor (mofuta oa pulse): E boloka matla ho tloha ho grid ho ea ho li-capacitor ka ho tjhaja butle le ho ntša matla a matla hang-hang nakong ea ho cheselletsa. | Phepelo ea matla a grid e otlolohileng (mofuta o tsoelang pele): E hula matla ho tsoa ho grid e sa khaotse nakong ea welding, e itšetlehile ka matla a matla a grid a tsitsitseng. |
Nako ea ho Welding | Millisecond-level (1–100 ms): E phethela welding ka nako e khuts'oane haholo ka ho kenya mocheso o tlase haholo. | Makholo a milliseconds ho isa ho metsotsoana: Ts'ebetso ea ho tjheseletsa butle butle ka ho bokellana ha mocheso ho totobetseng. |
Sebaka se Ametsoeng ke Mocheso (HAZ) | Nyenyane: Matla a tsepamisitsoeng le nako e khuts'oane ea ts'ebetso e fella ka li-welds tse moqotetsane le deformation e nyane ea mocheso, e loketseng likarolo tse nepahetseng. | E kholoanyane: Ho futhumatsa ho sa khaotseng ho ka baka mocheso o phahameng oa lehae litsing tsa mosebetsi, tse ka lebisang ho deformation kapa annealing. |
Grid Impact | Tlase: Nako e tsitsitseng nakong ea ho tjhaja (mohlala, ho tjhaja ka mekhahlelo), le nako e khuts'oane ea nako e khuts'oane nakong ea welding e baka ho fetoha ho fokolang ha grid. | Holimo: Nako e phahameng ea hang-hang (ho fihla ho li-ampere tse likete tse mashome) nakong ea ho cheselletsa ho ka baka ho theoha ka tšohanyetso ha motlakase oa grid, ho hlokang mokhoa o inehetseng oa ho aba matla. |
Maemo a Kopo | Likarolo tse tšesaane tse nang le marako (mohlala, li-foil tsa tšepe tsa 0.1-2 mm, li-lead tsa karolo ea elektronike), litlhoko tse nepahetseng haholo (mohlala, lithium battery tab welding), mela ea tlhahiso e ikemetseng (e lumellanang le liroboto tsa ho tjheseletsa ka lebelo le phahameng). | Thick plate plate (mohlala, lipoleiti tsa tšepe tse fetang 3 mm), maemo a sa khaotseng a tlhahiso (mohlala, tlhokomelo, ts'ebetso ea li-batch tse nyane), le linako tse nang le litlhoko tse tlase bakeng sa lebelo la ho tjheseletsa. |


Heltec Full Range of Spot Welder
Battery Spot Welder 01 Series
Battery Spot Welder 02/03 Series
Mochini oa Welding oa Laser

Mochini oa Welding oa Laser oa Cantilever

Mochini oa Welding oa Laser o tšoaroang ka letsoho
Spot welder Accessories - Spot Welding Head

Hlooho ea Pneumatic Flat Welding


Hlooho ea Pneumatic Butt Welding
Melemo ea tekheniki
Ho boloka matla le ho sebetsa hantle:Tšebeliso e tlase ea hang-hang ea matla ho tsoa ho marang-rang a matla, matla a phahameng, tšusumetso e nyane ho grid ea motlakase, le ho boloka matla.
Boleng bo botle ba welding:Lintlha tsa welding li tiile, ha li na mebala, li boloka mokhoa oa ho belisa le bokhoni bo phahameng; Phallo ea motlakase e tsitsitse ebile e na le ts'ebetso e ntle, e ka netefatsang ho lumellana ha phello ea sehlahisoa sa welding.
Bophelo bo bolelele ba li-electrode:Ha ho bapisoa le mechine e tjheseletsang letheba, bophelo ba electrode bo ka atoloswa ka makhetlo a fetang a mabeli, ho fokotsa litšenyehelo tsa tšebeliso.
Ho ikamahanya le maemo ho matla:E sebetsa haholo ho lisebelisoa tsa ho tjheseletsa, tse loketseng litšepe tse se nang ferrous le lisebelisoa tsa alloy tse kang koporo, aluminium, tšepe e sa hloekang, nickel, joalo-joalo; E na le bokhoni bo botle ba ho sebetsa likotoana tsa botenya le libopeho tse fapaneng.
Lethathamo la Khetho ea Mehlala
SKU | HT-SW01A | HT-SW01A+ | HT-SW01B | HT-SW01D | HT-SW01H | HT-SW02A | HT-SW02H | HT-SW03A | HT-SW33A | HT-SW33A+ |
Molao-motheo | DC polokelo ea matla | DC polokelo ea matla | DC polokelo ea matla | DC polokelo ea matla | DC polokelo ea matla | DC polokelo ea matla | DC polokelo ea matla | AC transformer | DC polokelo ea matla | DC polokelo ea matla |
Matla a Phallo | 10.6KW | 11.6KW | 11.6KW | 14.5KW | 21KW | 36KW | 42KW | 6KW | 27KW | 42KW |
Output Current | 2000A (Boholo.) | 2000A (Boholo.) | 2000A (Boholo.) | 2500A (Boholo.) | 3500A (Boholo.) | 6000A (Boholo.) | 7000A (Boholo.) | 1200A (Boholo.) | 4500A (Boholo.) | 7000A (Boholo.) |
Lisebelisoa tse Tloaelehileng tsa Welding | 1.70A(16mm²) pene ea tjheseletsa e arohaneng; | 1.70B(16mm²) pene ea ho tjheseletsa e kopantsweng; | 1.70B(16mm²) pene ea ho tjheseletsa e kopantsweng; | 1.73B(16mm²) pene e kopantseng ea tjheseletsa; | 1.75 (25mm²) pene ea tjheseletsa e arohaneng; | 75A(35mm²) pene ea tjheseletsa e arohaneng | 1. 75A(50mm²) pene ea tjheseletsa e arohaneng | 1.73B(16 limilimithara tse ²)pene e kopantsoeng ea welding; | Sesebelisoa sa ho tjheseletsa sebaka sa A30 sa Pneumatic. | Sesebelisoa sa ho tjheseletsa sebaka sa A30 sa Pneumatic. |
Welding e hloekileng ea nickel | 0.1 ~ 0.15 limilimithara | 0.1 ~ 0.15 limilimithara | 0.1 ~ 0.2 limilimithara | 0.1 ~ 0.3 limilimithara | 0.1 ~ 0.4 limilimithara | 0.1 ~ 0.5 limilimithara | 0.1 ~ 0.5 limilimithara | 0.1 ~ 0.2 limilimithara | 0.15 ~ 0.35 limilimithara | 0.15 ~ 0.35 limilimithara |
Nickel plating welding | 0.1 ~ 0.2 limilimithara | 0.1 ~ 0.25 limilimithara | 0.1 ~ 0.3 limilimithara | 0.15 ~ 0.4 limilimithara | 0.15 ~ 0.5 limilimithara | 0.1 ~ 0.6 limilimithara | 0.1 ~ 0.6 limilimithara | 0.1 ~ 0.3 limilimithara | 0.15 ~ 0.45 limilimithara | 0.15 ~ 0.45 limilimithara |
Welding e hloekileng ea nickel | / | / | / | / | / | 0.1 ~ 0.2 limilimithara | 0.1 ~ 0.3 limilimithara | / | 0.1 ~ 0.2 limilimithara | 0.1 ~ 0.2 limilimithara |
Nickel aluminium composite sheet sheet | / | / | / | / | 0.1 ~ 0.15 limilimithara | 0.1 ~ 0.2 limilimithara | 0.15-0.4mm | / | 0.1 ~ 0.3 limilimithara | 0.1 ~ 0.3 limilimithara |
Copper welding LFP Copper electrode (e nang le flux) | / | / | / | / | / | 0.1 ~ 0.3 limilimithara | 0.15 ~ 0.4 limilimithara | / | 0.1 ~ 0.3 limilimithara | 0.1 ~ 0.3 limilimithara |
Phepelo ea motlakase | AC 110~220V | AC 110~220V | AC 110~220V | AC 110~220V | AC 110~220V | AC 110 kapa 220V | AC 110 kapa 220V | AC 110 kapa 220V | AC 110 kapa 220V | AC 110 kapa 220V |
Voltage e hlahisoang | DC 5.3V(Boholo.) | DC 6.0V(Boholo.) | DC 6.0V(Boholo.) | DC 6.0V(Boholo.) | DC 6.0V(Boholo.) | DC 6.0V(Boholo.) | DC 6.0V(Boholo.) | DC 6.0V(Boholo.) | DC 6.0V(Boholo.) | DC 6.0V(Boholo.) |
Ho Chesoa ha Polokelo ea Matla Hona Joale | 2.8A(Boholo.) | 2.8A(Boholo.) | 4.5A(Boholo.) | 4.5A(Boholo.) | 6A(Boholo.) | 15A(Boholo.) | 15A(Boholo.) | Ha ho hlokahale ho tjhaja | 15A -20A | 15A -20A |
Nako ea Pele ea ho tjhaja | 30 ~ 40 mets | 30 ~ 40 mets | 30 ~ 40 mets | 30 ~ 40 mets | Hoo e ka bang 18 min | Hoo e ka bang 18 min | Hoo e ka bang 18 min | Ha ho hlokahale ho tjhaja, hokela ho sebedisa | Hoo e ka bang 18 min | Hoo e ka bang 18 min |
Mokhoa oa ho qala | AT: Sehlomathisi sa induction ka ho iketsa | AT: Sehlomathisi sa induction ka ho iketsa | AT: Sehlomathisi sa induction ka ho iketsa | AT: Sehlomathisi sa induction ka ho iketsa | AT: Sehlomathisi sa induction ka ho iketsa | AT: Sehlomathisi sa induction ka ho iketsa | AT: Sehlomathisi sa induction ka ho iketsa | MT: Mohatla oa maoto a maoto | MT: Mohatla oa maoto a maoto | MT: Mohatla oa maoto a maoto |
On-resistance/Nickel Sheet Resistance Measurement Function | × | × | × | × | × | × | √ | × | × | × |
Mosebetsi oa Teko ea Voltage | × | √ | × | × | × | × | × | × | × | × |




Sebaka sa Kopo ea Mochini oa Welding oa Battery Spot
- Spot welding ea Lithium iron phosphate battery, Ternary lithium battery, nickel steel.
- Kopanya kapa u lokise lipakete tsa betri le mehloli e nkehang.
- Ho hlahisa lipakete tse nyane tsa betri bakeng sa lisebelisoa tsa elektroniki tse tsamaeang
- Welding ea lithium polymer betri, betri ea selefouno, le boto ea potoloho e sireletsang.
- Baetapele ba ho tjheseletsa ba marang-rang ho merero e fapaneng ea tšepe, joalo ka tšepe, tšepe, tšepe, koporo, nickel, molybdenum le titanium.
Iteanye le rona
Haeba u na le sepheo sa ho reka kapa litlhoko tsa tšebelisano-'moho bakeng sa lihlahisoa tsa rona, ka kopo ikutloe u lokolohile ho ikopanya le rona ka nako efe kapa efe. Sehlopha sa rona sa litsebi se tla inehela ho u sebeletsa, ho araba lipotso tsa hau, le ho u fa litharollo tsa boleng bo holimo.
Jacqueline: jacqueline@heltec-bms.com / +86 185 8375 6538
Nancy: nancy@heltec-bms.com / +86 184 8223 7713